Bad Sobernheim, Germany, September 2024

Drawing on over 35 years’ experience in the production and use of post-industrial recycled (PIR) materials in reinforced thermoplastics, TechnoCompound is particularly focusing its presence at Fakuma 2024 on its growing range of solutions using post-consumer recycled (PCR) materials for demanding technical applications. One development priority is on emission- and odor-reduced, long glass fiber (LGF) compounds for the automotive industry, specifically for vehicle interiors. The company can offer a growing number of ready-to-use (RTU) TechnoGreen grades based on polypropylene. In addition, TechnoCompound’s new Concentrate Dilution Concept (CDC) makes it possible to blend TechnoFiber LGF compounds for structural components with PCR to achieve the mechanical properties required for the application while at the same time reducing the finished products’ carbon footprint to the greatest possible extent. While some RTU grades containing PCR are already in use in mass production applications, the new CDC solutions are currently under evaluation by OEMs. Another development project TechnoCompound will be presenting at Fakuma 2024 is materials for PCR-based packaging for the non-food sector.

Ready-to-use or individually compoundable
Across all product ranges, 70% of the company’s compounds already contain recycled material. Around 30% have PCR contents of between 20% and 100% and the intention is for such use to go on rising. These sustainable material solutions open opportunities for tier 1 suppliers and OEMs in the automotive industry to ensure compliance with the End-of-Life Vehicle (ELV) Directive for new and further developments. Working hand-in-hand in strategic partnerships with these players, as well as others from industry in general, TechnoCompound can offer all-round support in the development of suitable closed-loop solutions with a reduced environmental footprint.

Ready-to-use TechnoGreen PP LGF grades with fiber contents of 20 to 50 wt.% have long been marketed. They were initially available as compounds with PIR material (classes GK1 and GK2 according to the VW standard) for improving environmental characteristics. The company can now also offer TechnoGreen RTU grades with PCR contents (class GK4) of between 21 and 35 wt.%. Two of these are already in mass production. The special pultrusion process used by TechnoCompound results in high-quality compounds that perform as well as products based on virgin materials.

In addition to the RTU grades, TechnoCompound’s new Concentrate Dilution Concept may be the right solution, in particular for structural components. TechnoGreen PP LGF 60 with a matrix of 100% virgin material (class GK1A) is used as the base material. This is blended in-machine with TechnoFin rPP, which consists of 100% PCR (class GK4). For example, when blended in a 1:2 ratio, it is thus possible to make carbon savings of 55% in comparison with processing virgin material with the same fiber content. A further advantage is reduced inventory, as material inputs are limited to two components instead of many when various prefabricated blends are processed.

Tests passed with flying colors
A whole series of TechnoCompound’s RTU compounds have now passed the automotive industry’s stringent testing and have found their way into mass production in two Audi models, one Seat model and the 2024 models of the Porsche Macan and the Mini Cooper. Applications include instrument panel (IP) carriers, which are subject to the strict limits for volatile substance and odor emissions applicable to interior applications.

Documented sustainability
TechnoCompound is playing a pioneering role with certificates from its partner company ConClimate. These certificates, which state the PIR:PCR ratio, have been indicating the carbon footprint and carbon savings for all products since early 2023. Values are calculated using Substain software which, on the basis of recognized emission factors, provides carbon emissions (scope 1, 2 and 3) including packaging “to gate” using TechnoCompound’s factory gate as the default. The company is also planning to be in a position to disclose its corporate carbon footprint shortly and to draw up a decarbonization plan in line with the Polymer-Group’s sustainability goals. Along the entire value chain, these measures help complying with statutory, customer and social sustainability requirements, achieving the company’s own environmental targets and meeting likely upcoming statutory requirements for recyclate content in new products.

Into pole position
As Managing Director Dirk Breitbach explains, “It’s 35 years that we’ve been using recycled materials to produce high-quality compounds. Thanks to strict quality standards, these products, as well as our new PCR-based solutions, meet stringent requirements across a wide range of applications. Our experience in the production, processing and application of these products means we can support customers in the automotive industry and other sectors right from material planning and optimization through to the start of mass production while boosting sustainability.”

And Head of Sales Rifat Erden adds, “Our standard TechnoFiber grades, our new TechnoGreen RTU compounds and the CDC (Concentrate Dilution Concept) with PCR components increase flexibility and are a strong starting point for our customers. This puts them in pole position in terms of sustainability and gives them an opportunity to win a long-term lead on their competitors.”

TechnoCompound GmbH (www.technocompound.com) in Bad Sobernheim, Germany, which is part of the Polymer-Group (www.polymer-gruppe.de) is a leading supplier of tailored polymer compounds in Europe and has a staff 90. It has state-of-the-art production facilities, and compounds, finishes and modifies polymers with a production capacity of 60,000 metric tons per year for customer-specific applications. The functionally modified polymer range extends from commodities via technical compounds to thermoplastic elastomers.

These polymers are primarily used by the automotive industry and its suppliers. However, applications in logistics, packaging and construction are also served. Its lean organization and modern facilities optimized for efficiency mean TechnoCompound GmbH is able to offer its products at competitive prices. Its full-service offering includes on-site technical application support and the development of compounds individually tailored to a specific application.

The Polymer-Group, with its registered office in Bad Sobernheim, emerged from Polymer-Chemie GmbH, an independent family business founded in 1973 to compound, finish and modify plastics. Combining flexibility and performance, it is increasingly supporting its global customers with innovative and customized products of the highest quality. Today, the Polymer-Group comprises the compounders Polymer-Chemie, Polymer-Chemie Rus, Sun Alloys Europe, TechnoCompound, PolyMIM and SoBiCo and has over 500 staff.

Further information:
Rifat Erden, Head of Sales and Marketing, TechnoCompound GmbH,
Am Gefach, D-55566 Bad Sobernheim, Germany
Tel.: +49 (0) 67 51/8 56 05-472, rifat.erden(at)technocompound.com 

Editorial contact and voucher copies:
Dr.-Ing. Jörg Wolters, KONSENS Public Relations GmbH & Co. KG,
Hans-Böckler-Straße 20, D-63811 Stockstadt am Main, Germany
Tel.: +49 (0) 60 27/99 00 5-13, mail(at)konsens.de