18. July 2019

Patrick Zimmermann appointed member of the management team - New areas of responsibility for Niklas Voß and Denise Martha

As of June 2019 Patrick Zimmermann became a member of FKuR Kunststoff GmbH’s Management Team with responsibility for sales, marketing and market development. With effect from 1st July 2019, two further appointments were made.[more]

[more]
11. July 2019

Sustainable compounding
Blown film manufacturer in Benin switches from polyethylene-based to biodegradable products with help from Coperion

Coperion has enabled Benin-based blown film manufacturer Asahel Benin Sarl. to produce sustainable, bio-based plastic films in the future by delivering a complete compounding system and sharing the corresponding process engineering expertise. The system includes a ZSK 26 Mc18 twin screw extruder,...[more]

[more]
09. July 2019

New Developments and Optimized Cutting Gap Adjustment
New Generation of Strand Pelletizers for Improved Pellet Quality and Easier Handling

Coperion Pelletizing Technology GmbH, Offenbach, introduces improved dual bearing strand pelletizers which have been re-engineered based on field experience and current market demands. The SP140, SP240 and SP340 models in the SP series have been equipped with a variety of enhanced features for...[more]

[more]
04. June 2019

New Buehler Metallographic Laboratory on the campus of the University of Warwick/UK
Collaboration with Warwick Manufacturing Group Yields Synergy Effects

Buehler ITW Test & Measurement, a leading manufacturer of instruments, consumables and accessories for metallography and materials analysis, has opened a new European Solutions Centre in a collaborative venture with Warwick Manufacturing Group (WMG) with over 600 staff and a strong relation with...[more]

[more]
21. May 2019

Hot runner nozzles for very low shot weights and extended range of cylinders

At Molding Expo 2019, which takes place from 21 to 24 May in Stuttgart, HRSflow will present their new small-sized SA series hot runner nozzles for injection molding small technical components with a very compact cut-out in the tool. The company will also showcase extensions of its cylinder...[more]

[more]
0    Text deutsch HRSflow 2019-0107 MEX SA (Size: 231 K, Type: docx)
1    Text English HRSflow 2019-0107 MEX SA (Size: 224 K, Type: docx)
-1    Image HRSflow 2019-0107 MEX-SA (Size: 286 K, Type: jpg)
5    Text Italian HRSflow 2019-0107 MEX SA (Size: 246 K, Type: docx)
16. May 2019

i-mold’s integrated indexing plate drive provides a space saving all-in-one solution
Supports short cycle times in multi-component injection moulding

A new addition to i-mold's portfolio of Servomold solutions is a line-up of servomotor-powered indexing plate drives that can be fully integrated into multi-component injection moulds in a space saving arrangement. Available in four standard system sizes, these units are suitable for plate weights...[more]

[more]
09. May 2019

FKuR at CosmeticBusiness 2019: Cosmetic tubes from biobased polyethylene - saving resources, recyclable and promoting sales

Cosmetic tubes made from Braskem‘s biobased Green PE combine sustainability and recyclability along with attractiveness at the point of sale so meeting the demands of brand owners and end consumers. FKuR, a leading producer and distributor of bioplastic granulates, will present successful...[more]

[more]
07. May 2019

New trading and service portal for recycled plastics goes live

plastship (www.plastship.com), successfully launched on 6 May 2019, is a new trading and service platform for buyers and sellers of regrinds, re-granulates and recyclates plus, in the near future, also of additives for tailoring the properties of recycled materials, as well as associated services. [more]

[more]
02. May 2019

Buehler at Control 2019: Mosaic Diamond Grinding Discs provide high material removal rate for samples made from steel, hard alloys and other materials

At Control 2019, Buehler ITW Test & Measurement, a leading manufacturer of instruments, consumables and accessories for metallography and materials analysis, will be presenting its new Mosaic Diamond Grinding Discs (DGD). The fifth line of DGDs in Buehler's grinding consumable offering, Mosaic...[more]

[more]
0    Text-deutsch Buehler 2019-0068 Mosaic (Size: 473 K, Type: docx)
1    Text-English Buehler 2019-0068 Mosaic (Size: 471 K, Type: docx)
4    Text-French Buehler 2019-0068 Mosaic (Size: 373 K, Type: docx)
-1    Image Buehler 2019-0068 Mosaic (Size: 523 K, Type: jpg)
09. April 2019

15th Birthday of STS Extruders: Coperion Adds New Laboratory Extruder to the STS Series

The STS twin screw extruder from Coperion is celebrating its 15th birthday this year. Thanks to the ongoing technological and design development, the STS extruder has proven itself today as a strong performing quality product for numerous compounding processes on the market.[more]

[more]
04. April 2019

HRScool enables hot runner systems with uncooled cylinder

HRScool is an innovative solution for hot runner injection molding, in which the otherwise necessary water cooling of the corresponding actuator can be dispensed with. The key to this is the twice optimized temperature management system, in which insulating supporting columns with a minimal contact...[more]

[more]
4    Text French HRSflow 2018-0337 HRScool (Size: 216 K, Type: docx)
1    Text English HRSflow 2018-0337 HRScool (Size: 215 K, Type: docx)
0    Text deutsch HRSflow 2018-0337 HRScool (Size: 217 K, Type: docx)
5    Text Italian HRSflow 2018-0337 HRScool (Size: 222 K, Type: docx)
3    Text Spanish HRSflow 2018-0337 HRScool (Size: 215 K, Type: docx)
-1    Text Czech HRSflow 2019-0337 HRScool (Size: 221 K, Type: docx)
-1    Image HRSflow 2018-0337 HRScool (Size: 234 K, Type: jpg)
03. April 2019

Powtech 2019: New Solutions for the Process Industry

At Powtech 2019 (April 9-11, 2019, Nuremberg/Germany), Coperion and Coperion K-Tron will present their versatile bulk materials handling solutions for various process steps at their booth no. 4-290 in Hall 4.[more]

[more]
01. April 2019

50 years of REIKU: Successful international producer of cable protection systems celebrates its golden anniversary

In March 2019, REIKU GmbH celebrated its 50th anniversary. It was back in 1969 that company founder Hans Hennemann arranged for his firm to be entered in the commercial register. At that time, the company produced zip-on plastic sheathing products in the courtyard of a city house in Gummersbach to...[more]

[more]
1    Text English 2019-0010 50 Jahre REIKU (Size: 295 K, Type: docx)
0    Text deutsch 2019-0010 50 Jahre REIKU (Size: 296 K, Type: docx)
-1    Image 2019-0010 50 Jahre REIKU (Size: 442 K, Type: jpg)
01. April 2019

Coperion K-Tron Salina Awarded ISO 9001:2015 Quality Certification

As of Friday, March 15, 2019, Coperion K-Tron Salina successfully satisfied the certification requirements to receive certification for ISO 9001:2015, by ABS Evaluations, Inc.[more]

[more]
19. March 2019

Buehler presents innovations and enhancements at Control 2019:
Wilson Universal Hardness Testers and AutoMet Grinder-Polishers - Ideal for High-Throughput Environments

At Control 2019 to be held from May 7 - 10 in Stuttgart/ Germany, Buehler ITW Test and Measurement, a leading manufacturer of equipment, consumables and accessories for metallography and materials analysis, will be showcasing at its Booth No. 5112 in Hall 5 its new, exceptionally robust Wilson®...[more]

[more]
0    Text deutsch Buehler 2019-0048 Control2019 (Size: 804 K, Type: docx)
1    Text English Buehler 2019-0048 Control2019 (Size: 801 K, Type: docx)
4    Text French Buehler 2019-0048 Control2019 (Size: 799 K, Type: docx)
-1    Image 01 Buehler 2019-0048 Control2019 (Size: 259 K, Type: jpg)
-1    Image 02 Buehler 2019-0048 Control2019 (Size: 317 K, Type: jpg)
18. March 2019

Ettlinger at the Plastics Recycling Show Europe 2019
Efficient melt filtration even for heavily contaminated plastics scrap

Ettlinger will be presenting the ERF melt filter family of high-performance filtration solutions capable of handling even high degrees of contamination at the Plastics Recycling Show Europe 2019, booth D1. [more]

[more]
0    Text deutsch Ettlinger 2019-0052 PRS2019 (Size: 339 K, Type: docx)
1    Text English Ettlinger 2019-0052 PRS2019 (Size: 339 K, Type: docx)
-1    Image 01 Ettlinger 2019-0052 PRS2019 (Size: 632 K, Type: jpg)
-1    Image 02 Ettlinger 2019-0052 PRS2019 (Size: 449 K, Type: jpg)
08. March 2019

FKuR: Heading for a circular economy and sustainability with biobased and biodegradable plastics

Willich/Germany, March 2019 – As part of the current discussions regarding the ecological sense and consequences of the use of plastics, biobased as well as biodegradable plastics are taking on an as yet unidentified special status. [more]

[more]
07. March 2019

Highly Accurate Feeding Solution for Growing Demands of Continuous Processing

At this year's Interphex (April 2 to 4, 2019, booth 2558, New York/USA) as well as at Powtech (April 9 to 11, 2019, hall 4, booth 4-290, Nuremberg/Germany) Coperion K-Tron will display the next generation of its highly accurate, gravimetric K3-PH feeders for the pharmaceutical industry. [more]

[more]
27. February 2019

Recycled Mafill® PP now available in identical quality worldwide - Geiger Automotive opts to use it in European and US manufacturing operations

Zwingenberg/Germany, February 2019 -- Mafill® CR HT 5344 H is Ravago's first globally available recycled polypropylene grade to meet the same specifications – irrespective of whether it is produced from the starting materials regionally available in Europe or the USA. [more]

[more]
0    RESINEX Text D Mafill-Geiger-BMW (Size: 196 K, Type: docx)
1    RESINEX Text E Mafill-Geiger-BMW (Size: 199 K, Type: docx)
-1    RESINEX Image Mafill-Geiger-BMW (Size: 207 K, Type: jpg)
20. February 2019

Coperion and Coperion K-Tron at the European Coatings Show 2019

Smart Feeding and Extrusion Technology Ensures Maximum Productivity in Powder Coating Manufacturing.[more]

[more]